Importing resources#

There are a number of scenarios in which it is necessary to import existing resources for management by Pulumi:

Migrating manually managed resources to an infrastructure-as-code solution;
Migrating from other infrastructure-as-code platforms to Pulumi;
Moving resources between Pulumi stacks in cases where e.g. pulumi state move is not sufficient.

Pulumi offers two approaches for importing resources: the import resource option and the pulumi import command. At a minimum, importing a resource involves adding the resource’s state to the destination stack’s state. Once the resource has been added to the stack, the Pulumi CLI is able to manage the resource like any other.

The `import` resource option#

The import resource option accepts the ID of an existing resource whose state should be 📞 Read and imported into the stack.

Importing a resource using the import resource option requires that the desired state described by the Pulumi program for a resource being imported matches the actual state of the resource as returned by the provider. More precisely, given a resource R of type T with import ID X and set of inputs (as specified in the program) Iₚ, the engine performs the following sequence of operations:

Fetch the current inputs Iₐ and state Sₐ for the resource of type T with ID X from its provider by calling the provider’s 📞 Read method. If the provider does not return a value for Iₐ, the provider does not support importing resources and the import fails.
Process the ignoreChanges resource option by copying the value for any ignored input property from Iₐ to Iₚ.
Validate the resource’s inputs and apply any programmatic defaults by passing Iₚ and Iₐ to the provider’s 📞 Check method. Let Iₖ be the checked inputs; these inputs form the resource’s desired state.
Check for differences between Iₖ and Sₐ by calling the provider’s 📞 Diff method. If the provider reports any differences, the import either succeeds with a warning (in the case of a preview) or fails with an error (in the case of an update).

If all of these steps succeed, the user is left with a definition for R in their Pulumi program that matches that in the stack’s state exactly.

        sequenceDiagram
    participant LH as Language host
    box Engine
        participant RM as Resource monitor
        participant SG as Step generator
        participant SE as Step executor
    end
    participant P as Provider

    LH->>+RM: RegisterResourceRequest(type, name, inputs, options)
    RM->>+SG: RegisterResourceEvent(type, name, inputs, options)
    SG->>+SE: ImportStep(inputs, options)
    SE->>+P: ReadRequest(type, id)
    P->>-SE: ReadResponse(current inputs, current state)
    SE->>+P: CheckRequest(type, inputs, current inputs)
    P->>-SE: CheckResponse(inputs', failures)
    SE->>+P: DiffRequest(type, inputs', current state, options)
    P->>-SE: DiffResponse(diff)
    SE->>-RM: Done(current state)
    RM->>-LH: RegisterResourceResponse(URN, ID, current state)

Importing a resource using the import resource option#

`pulumi import`#

pulumi import is a newer method of importing resources into a stack that also generates program code for imported resources. pulumi import accepts a list of import specs, where each spec comprises at minimum a type token, name, and ID, but may also specify a parent URN, provider reference, and package version. Unlike the import resource option, pulumi import does not insist that the desired state of the resource in the Pulumi program matches the actual state of the resource as returned by the provider, since it is capable of generating code to match the actual state. Given a resource R of type T with import ID X and an (initially empty) set of input properties Iₚ, the engine performs the following sequence of operations:

Fetch the current inputs Iₐ and state Sₐ for the resource of type T with ID X from its provider by calling the provider’s 📞 Read method. If the provider does not return a value for Iₐ, the provider does not support importing resources and the import fails.
Fetch the schema for resources of type T from the provider. If the provider is not schematized or if T has no schema, the import fails.
Copy the value of each required input property defined in the schema for T from Iₐ to Iₚ.
Validate the resource’s inputs and apply any programmatic defaults by passing Iₚ and Iₐ to the provider’s 📞 Check method. Let Iₖ be the checked inputs; these inputs form the resource’s desired state.
Check for differences between Iₖ and Sₐ by calling the provider’s 📞 Diff method. If the provider reports any differences, the values of the differing properties are copied from Sₐ to Iₚ. This is intended to produce the smallest valid set of inputs necessary to avoid diffs. This does not use a fixed-point algorithm because there is no guarantee that the values copied from Sₐ are in fact valid (state and inputs with the same property paths may have different types and validation rules) and there is no guarantee that such an algorithm would terminate ( bridged Terraform providers, for example, have had bugs that cause persistent diffs, which can only be worked around with ignoreChanges).

If all of these steps succeed, the user is left with a definition for R in their state. The Pulumi CLI then passes the inputs Iₚ stored in the state to the import code generator. The import code generator converts the values present in Iₚ into an equivalent PCL representation of R’s desired state, then passes the PCL to a language-specific code generator to emit a representation of R’s desired state in the language used by the destination stack’s Pulumi program. The user can then copy the generated definition into their Pulumi program.

        sequenceDiagram
    participant PI as pulumi import
    participant CV as PCL converter
    participant LH as Language host
    box Engine
        participant ID as Import driver
        participant SE as Step executor
    end
    participant P as Provider

    PI->>+ID: Import(specs)
    ID->>+SE: ImportStep(inputs, options)
    SE->>+P: ReadRequest(type, id)
    P->>-SE: ReadResponse(current inputs, current state)
    SE->>+P: CheckRequest(type, inputs, current inputs)
    P->>-SE: CheckResponse(inputs', failures)
    SE->>+P: DiffRequest(type, inputs', current state, options)
    P->>-SE: DiffResponse(diff)
    SE->>-ID: Done(current state)
    ID->>-PI: Done(current state)

    PI->>+CV: Convert(current state)
    CV->>-PI: Done(PCL definitions)

    PI->>+LH: GenerateProgram(PCL definitions)
    LH->>-PI: Done(generated resource definitions)

Importing a resource using the pulumi import CLI#

Limitations and challenges#

The primary challenge in generating appropriate code for pulumi import lies in determining exactly what the input values for a particular resource should be. In many providers, it is not necessarily possible to accurately recover a resource’s inputs from its state. This observation led to the diff-oriented approach described above, where the importer begins with an extremely minimal set of inputs and attempts to derive the actual inputs from the results of a call to the provider’s 📞 Diff method. Unfortunately, the results are not always satisfactory, and the relatively small set of inputs present in the generated code can make it difficult for users to determine what inputs they actually need to pass to the resource to describe its current state.

A few other approaches might be:

Emit no properties at all and instead just output appropriate resource constructor calls. This will almost always emit code that does not compile or run, as nearly every resource has at least one required property.
Copy the value for every input property present in a resource’s schema from its state. This risks emitting code that does not compile due to differences in types between inputs and outputs, and also risks emitting code that does not work at runtime due to conflicts between mutually-exclusive properties (which are unfortunately common for Terraform-based resources, for example).

It is likely that some mix of approaches is necessary in order to arrive at a satisfactory solution, as none of the above solutions seems universally “correct”.

Error handling#

When using pulumi import --file=..., the engine runs a preview before making any changes. If errors are detected during the preview (e.g. a resource is not found), the command fails before writing anything to state. When --skip-preview is specified, the engine instead imports as many resources as possible, writing successful imports to state immediately and collecting any errors for display in the final output.

Both approaches are safe to retry: importing a resource that already exists in state is a no-op. However, it is possible to accidentally import the same physical resource under two different logical names, which creates an implicit aliasing situation where the stack tracks the same underlying resource twice.

Importing resources

Contents

Importing resources#

The import resource option#

pulumi import#

Limitations and challenges#

Error handling#

The `import` resource option#

`pulumi import`#